Titanium cladding copper anode bar :
1).Standards:GB/T12769 2)Base:Cu(T2,TU2),AL 3)D:(8~60)mm
4)corrosion resistance 5)used by MMO and Platinised anode (ICCP)
2).Titanium Clad Copper Bar is being widely used by MMO and
Platinised anode (ICCP) manufacturers for cathodic protection
system and so on .
3).Standards:GB/T12769-2003 2.Base:Cu(T2,TU2),AL,etc. 3.D:(8~60)mm
4.lots shapes of bending, punching, and welding
We specialize in this field for several years,with the strength of
titanium bars.With good quality and pretly competitive price.
Square bar/ Rectangle bar/Round bar
Hot extruding/Hot extruding+Stretching method/Explosion cladding
Ultrasonic test(UT) ; X-ray test
With advanced explosion-rolling process, we provide the first rate
non-ferrous metal composites, mainly titanium clad copper and also
including zirconium clad copper, 316L steel clad copper, titanium
clad 316L steel plates, bars, tubes, composite wire, and multilayer
clad composites, etc. The clad metal products could be up to four
individual layers of metal or alloys. At minimum, there is a core
and an outer layer, each layer thickness could be optimized to your
B. Processed products of non-ferrous metal, mainly titanium
fasteners, screws, nuts, flanges and bends;
C. Titanium and titanium alloy bars, rods, tubes, pipes, plates,
sheets, wires, coils, foils, and sections with high machining
D. Various kinds of equipment made of titanium, such as titanium
heat exchanger, titanium tray, and titanium anodes.
Titanium clad copper bars and other non-ferrous metals clad
Titanium clad copper bars have been made by that a copper bar is
clad in a certain thickness of titanium level, it mainly uses as a
conductor under more corrosive work conditions. It is often used as
a stand in plating, electrolysis, hydrometallurgy processes,
because it has not only the original conductive property of the
copper bar, but also protecting the copper bar from corrode by
titanium level, and can greatly lower pollution of electrolyte and
But, if you request that the material has this function above, then
you must be sure that there are much stronger combination strength
and much higher pasting rate between the copper bars and the
titanium level, this can not be met by traditional mechanical
combination methods. So in order to overcome it, our company, with
advanced explosion-rolling process, has successfully produced
titanium clad copper bars with sheared strength ≥ 130 Mpa, compact
rate ≥ 98%, we can also supply the various specification of round,
square, flat bars material, the longest length of the bars can
reach above 10 meters and we can weld different shape material
together in according to the clients request. We could also make
nickel clad bars, stainless steel clad copper bars, zirconium clad
copper bars series products through the same process technology.
Properties for Titanium Clad Composites
(1) Shear strength: The shear strength is tested and guaranteed in
accordance with GB, ASTM, and JIS.
(2) Tensile strength: The tensile strength is guaranteed.
(3) Ductility: Ductility of cladding metal is guaranteed in face
bend (=cladding metal in tension), and the ductility of base metal
is guaranteed in reverse bend (=cladding metal in compression).
(4) Elongation: The lower limit of the elongation of cladding or
base metal is guaranteed.
(5) Hardness: The bonded interface is slightly hardened after
The interface can be softened by heat treatment to an original
There exists no difficulty in bending and drawing works.
(6) Corrosion Resistance: Explosion bonding, a clad processing,
guarantees excellent corrosion resistance of clad materials.
(7) High reliability; High conductivity; Biocompatibility; Weld
ability; Cost effective.
We also manufacture titanium clad copper, stainless steel clad
copper, copper clad aluminium and all kinds of tianium products.